Halliburton
LoginRegister
    IADD News
  Print    
    IADD News
  Print    
    Sections
   
    IADD News
Oct 8

Written by: IADD Editor
Friday, October 08, 2010 

The objective of this project wasw to drill a 6 1/8-in. horizontal section. Based on previous experience, the well’s high levels of torque and drag precluded using conventional directional drilling technology.

Data acquired using the EMpulse telemetry system provided command controls for the Revolution rotarysteerable system, allowing the horizontal section to be successfully geosteered from 2,798 to 7,200 ft (852 to 2,195 m) measured depth (MD). The average rate of penetration (ROP) was 33.6 ft/hr in two bit runs with underbalanced conditions maintained throughout the operation.

Value to Client

Using Weatherford’s Revolution and EMpulse MWD systems allowed the operator to access zones that could not typically be logged or reached under prevailing conditions. This operation was the first successful use of rotary-steerable system technology using electromagnetic transmission anywhere in the world.

The Revolution rotary-steerable system, combined with Weatherford MWD/LWD systems, can drill the most complex 3D well paths, operating at up to 329°F (165°C) and at pressures as high as 29,000 psi (173 MPa).

Client Noble Energy

Location Sullivan County, Indiana, USA

Hole Size 6-1/8 in.

Section Length 4,402 ft (1,341 m)

Average ROP

  • 1st run: 35.2 ft/hr
  • 2nd run: 30.2 ft/hr

Product/Services

  • Revolution rotary-steerable service
  • EMpulse MWD system
   

Tags:

1 comment(s) so far...

Re: First Successful Underbalanced Operation in Horizontal Section Uses Rotary Steerable and EMpulse™ Technology

I almost wish I had waited another year to get my horizontal well, that's just my luck with things. This is great news for anyone else who wants to get it themselves though. I highly suggest that if you're on the fence take my advice and do it, you'll be happy with the results.

By Horizontal Well on   Monday, January 24, 2011

Your name:
Your email:
(Optional) Email used only to show Gravatar.
Your website:
Title:
Comment:
Add Comment   Cancel 
   
Home | News | Membership | Industry Directory | Members Directory | Events | About IADD
   International Association of Directional Drilling  |  Terms Of Use  |  Privacy Statement  |  Powered by IntegraLogics